FINDLOG: search near file: ../k001d/K001D000.000
 READSERIAL_WH: parse file ../k001d/K001D000.LOG
 down looking serial number is : 3898
 FINDLOG: search near file: ../k001u/K001U000.000
 READSERIAL_WH: parse file ../k001u/K001U000.LOG
   up looking serial number is : 754
LOADRDI: Loading data
 loading down-data ../k001d/K001D000.000
ISBB: BB-data 
 raw data has 733+2 bytes per ensemble
 WARNING  found 11 ensembles with bad checksum 
 read 509 ensemble and 25 bins 
 using RDI bottom track
 removed 0 values because of low percent good
 loading up-data ../k001u/K001U000.000
 raw data has 653+2 bytes per ensemble
 WARNING  found 12 ensembles with bad checksum 
 read 514 ensemble and 21 bins 
 removed 0 values because of low percent good
 try to shift timeseries by lag: -1 correlation: 0.82112
 best lag not obvious!  use time to match up-down looking ADCP
 mean lag is 0.97839 ensembles
 number of joint ensembles is : 509
 found 189 finite bottom velocities
 found 11 NaN bottom error velocities and discarded them
 removed 382 values because of high error velocity
 removed 0 bottom values because of high error velocity
 using whole profile since no start time was given
 removed 0 profiles due to larger tilt than 22
 removed 20 profiles due to larger tilt difference than 4
 multiply weight of bin 1 by 0.5
 Outlier discarded 415 bins down looking
 Outlier discarded 41 bins up looking
==> load data took 6 seconds
LOADNAV: load NAV time series ../ctdnav/00101.ctd
Warning: COLON arguments must be real scalars.
> In /home/felixt/A20/scripts/loadnav.m at line 33
  In /home/felixt/ladcp/m/laproc.m at line 43
  In /home/felixt/A20/scripts/runme.m at line 85
 number of NAV scans: 1842  delta t : 0.86397 seconds
 update start pos  from:NaN°N     NaN'  NaN°E     NaN'
                     to:43°N 14.8584'   50°W 36.9744'
 updated magnetic deviation and applied correction 
 update end pos    from:NaN°N     NaN'  NaN°E     NaN'
                     to:43°N 14.9802'   50°W 37.0524'
LOADCTD: load CTD time series ../ctdnav/00101.ctd
Warning: COLON arguments must be real scalars.
> In /home/felixt/A20/scripts/loadctd.m at line 46
  In /home/felixt/ladcp/m/laproc.m at line 60
  In /home/felixt/A20/scripts/runme.m at line 85
 number of CTD scans: 1842  delta t : 0.86397 seconds
 max CTD pressure 67 at 26-Sep-2003 00:19:20
 max LADCP depth 32 at 26-Sep-2003 00:19:16
 Changed Start Time : 26-Sep-2003 00:05:22  to 26-Sep-2003 00:16:25
 Changed End   Time : 26-Sep-2003 00:34:46  to 26-Sep-2003 00:23:22
 CTD max depth : 67
 best lag : 1 pings ~ 4 seconds  corr:0.81482
 adjust ADCP time to CTD time and shift depth record 
 adjust start/end position
 WARNING found 99% of  hbot=0  WARNING
 call own bottom track routine to get bottom
 using increased bottom echo amplitudes to create bottom track
 use bin below maximum for bottom track 
 created 93 bottom track data from normal velocities
GETDPTHI: Depth from vertical velocity inverse method
 starting run 1 to LADCP depth
 take soundspeed from CTD profile 
 correct velocities for sound speed 
 shallow station no surface detection 
 maximum depth from int W is :66.7551
 should be                   :66.7551
  bottom found at 80 +/- 1 m
 removing 761 values below bottom
==> get depth took 5 seconds
PREPINV: prepare data for inversion, form Super-Ensembles
 average profiles over (p.avens) 1 ensembles
 discarded 0 bottom tracks velocities because of dist > 300
 reduce weight for larger tilts 0.5 at 10 degree
 mean compass offset based on velocity is -31.3946 deg
 mean compass offset based on tilt is -34.774 deg
 rot up2down use mean up/down compass
 will not correct for sound speed twice
 avdz=NAN  => No pre-averaging done !!!
 mean compass offset based on tilt is -34.774 deg
 remove first guess ocean velocity from raw data
 adjusted for velocity offset in up and down looking ADCP
 remove first guess ocean velocity from raw data
 rot up2down use mean up/down compass
 rotated earlier, use difference 
 will not correct for sound speed twice
 avdz=NAN  => No pre-averaging done !!!
LOADSADCP: load SADCP data file ../sadcp/A20_sadcp.mat
 no SADCP data found in time window
==> prep inversion took 4 seconds
GETINV:  compute best velocity profile
 Barotropic velocity error 0.14388 [m/s]
 super ensemble velocity error 0.071459 [m/s]
 set velocity error to:0.11404 [m/s]
 vertical resolution (ps.dz) is 10 [m]
 preaveraged GPS ships vel 1 times 
 smooth Ocean velocity profile
 smooth CTD velocity profile
 bottom inversion 
 mean bottom track weight : 0.61799
 weight for bottom track is (ps.botfac) 1
 no SADCP data
 add barotropic constrain weight: 0.79261
 weight for drag is (ps.dragfac) 0.006673
 ready for inversion  length of d : 971
           (CTD vel)  length of A1:116
         (ocean vel)  length of A2:7
Moore-Penrose inverse
 solve only down trace
 smooth Ocean velocity profile
 smooth CTD velocity profile
Cholesky transform
 solve only up trace
 smooth Ocean velocity profile
 smooth CTD velocity profile
Cholesky transform
==> inversion took 1 seconds
GETSHEAR2: average shear profile over (ps.dz) 10 [m]
 maximum std (stdf) 2 of data 
 minimum weight  0.1 of data 
 will use 87 % of data 
 compute vertical diffusivity
 use dz:640 m long segments
 save results