FINDLOG: search near file: ../k005d/K005D000.000 READSERIAL_WH: parse file ../k005d/K005D000.LOG down looking serial number is : 3898 FINDLOG: search near file: ../k005u/K005U000.000 READSERIAL_WH: parse file ../k005u/K005U000.LOG up looking serial number is : 754 LOADRDI: Loading data loading down-data ../k005d/K005D000.000 ISBB: BB-data raw data has 733+2 bytes per ensemble WARNING found 11 ensembles with bad checksum read 1095 ensemble and 25 bins using RDI bottom track removed 0 values because of low percent good loading up-data ../k005u/K005U000.000 raw data has 653+2 bytes per ensemble WARNING found 25 ensembles with bad checksum read 1100 ensemble and 21 bins removed 0 values because of low percent good try to shift timeseries by lag: -1 correlation: 0.98123 shift ADCP timeseries by -1 ensembles number of joint ensembles is : 1095 found 193 finite bottom velocities found 18 NaN bottom error velocities and discarded them removed 594 values because of high error velocity removed 0 bottom values because of high error velocity ** WARNING WARNING WARNING WARNING WARNING WARNING ** ** found 6 large horizontal velocities ** WARNING check maximum velocity setting on CMD-file ** using whole profile since no start time was given removed 0 profiles due to larger tilt than 22 removed 86 profiles due to larger tilt difference than 4 multiply weight of bin 1 by 0.5 Outlier discarded 867 bins down looking Outlier discarded 470 bins up looking ==> load data took 13 seconds LOADNAV: load NAV time series ../ctdnav/00501.ctd Warning: COLON arguments must be real scalars. > In /home/felixt/A20/scripts/loadnav.m at line 33 In /home/felixt/ladcp/m/laproc.m at line 43 In /home/felixt/A20/scripts/runme.m at line 85 number of NAV scans: 5767 delta t : 0.43198 seconds update start pos from:NaN°N NaN' NaN°E NaN' to:42°N 55.7688' 50°W 52.9392' updated magnetic deviation and applied correction update end pos from:NaN°N NaN' NaN°E NaN' to:42°N 56.0478' 50°W 53.5926' LOADCTD: load CTD time series ../ctdnav/00501.ctd Warning: COLON arguments must be real scalars. > In /home/felixt/A20/scripts/loadctd.m at line 46 In /home/felixt/ladcp/m/laproc.m at line 60 In /home/felixt/A20/scripts/runme.m at line 85 number of CTD scans: 5767 delta t : 0.43198 seconds max CTD pressure 754 at 26-Sep-2003 05:02:51 max LADCP depth 756 at 26-Sep-2003 05:02:47 Changed Start Time : 26-Sep-2003 04:30:15 to 26-Sep-2003 04:44:58 Changed End Time : 26-Sep-2003 05:34:19 to 26-Sep-2003 05:25:49 CTD max depth : 747 best lag : 1 pings ~ 4 seconds corr:0.94807 adjust ADCP time to CTD time and shift depth record adjust start/end position WARNING found 99% of hbot=0 WARNING call own bottom track routine to get bottom using increased bottom echo amplitudes to create bottom track use bin below maximum for bottom track created 173 bottom track data from normal velocities GETDPTHI: Depth from vertical velocity inverse method starting run 1 to LADCP depth take soundspeed from CTD profile correct velocities for sound speed maximum depth from int W is :746.9202 should be :746.9202 bottom found at 754 +/- 0 m removing 393 values below bottom ==> get depth took 39 seconds PREPINV: prepare data for inversion, form Super-Ensembles average profiles over (p.avdz) 10 meter discarded 0 bottom tracks velocities because of dist > 300 reduce weight for larger tilts 0.5 at 10 degree mean compass offset based on velocity is -30.0417 deg mean compass offset based on tilt is -36.1919 deg rot up2down use mean up/down compass will not correct for sound speed twice remove reference velocity and average ensembles Outlier discarded 108 bins down looking Outlier discarded 90 bins up looking reduced ensemble size is 101 mean compass offset based on tilt is -36.1919 deg remove first guess ocean velocity from raw data adjusted for velocity offset in up and down looking ADCP remove first guess ocean velocity from raw data rot up2down use mean up/down compass rotated earlier, use difference will not correct for sound speed twice remove reference velocity and average ensembles Outlier discarded 107 bins down looking Outlier discarded 88 bins up looking reduced ensemble size is 101 LOADSADCP: load SADCP data file ../sadcp/A20_sadcp.mat found 4 SADCP profiles ==> prep inversion took 25 seconds GETINV: compute best velocity profile Barotropic velocity error 0.02448 [m/s] super ensemble velocity error 0.020084 [m/s] set velocity error to:0.038401 [m/s] vertical resolution (ps.dz) is 10 [m] preaveraged GPS ships vel 1 times smooth Ocean velocity profile smooth CTD velocity profile bottom inversion mean bottom track weight : 0.82001 weight for bottom track is (ps.botfac) 1 mean sadcp weight : 0.85844 weight for SADCP vel is (ps.sadcpfac) 1 add barotropic constrain weight: 1.5687 weight for drag is (ps.dragfac) 0.071403 ready for inversion length of d : 3765 (CTD vel) length of A1:101 (ocean vel) length of A2:74 Moore-Penrose inverse solve only down trace smooth Ocean velocity profile found 1 ill constrained elements smooth CTD velocity profile Cholesky transform solve only up trace smooth Ocean velocity profile smooth CTD velocity profile found 1 ill constrained elements Cholesky transform ==> inversion took 2 seconds GETSHEAR2: average shear profile over (ps.dz) 10 [m] maximum std (stdf) 2 of data minimum weight 0.1 of data will use 91 % of data compute vertical diffusivity use dz:640 m long segments save results