FINDLOG: search near file: ../K2001_082/k2004/A2501001.612
 FINDLOG: give up
 FINDLOG: search near file: ../K2001_082/k2004/A2501001.612
 READSERIAL_BB: parse file ../K2001_082/k2004/K2004
 down looking serial number is : 2612
   up looking serial number is : NaN
LOADRDI: Loading data
 loading down-data ../K2001_082/k2004/A2501001.612
ISBB: BB-data 
 raw data has 432+2 bytes per ensemble
 read 3534 ensemble and 16 bins 
 using increased bottom echo amplitudes to create bottom track
 use bin below maximum for bottom track 
 created 326 bottom track data from normal velocities
 removed 0 values because of low percent good
 found 326 finite bottom velocities
 removed 0 values because of high error velocity
 removed 0 bottom values because of high error velocity
 using whole profile since no start time was given
 removed 0 profiles due to larger tilt than 22
 removed 34 profiles due to larger tilt difference than 4
 multiply weight of bin 1 by 0.5
 Outlier discarded 1380 bins down looking
==> load data took 26 seconds
LOADNAV: load NAV time series ../A22ctdnav/00401.ctd
Warning: COLON arguments must be real scalars.
> In /home/felixt/A22/scripts/loadnav.m at line 33
  In /home/felixt/ladcp/m/laproc.m at line 43
  In /home/felixt/A22/scripts/runme.m at line 85
 number of NAV scans: 7339  delta t : 0.43198 seconds
 update start pos  from:NaN°N     NaN'  NaN°E     NaN'
                     to:11°N 30.0462'   65°W 59.9232'
 updated magnetic deviation and applied correction 
 update end pos    from:NaN°N     NaN'  NaN°E     NaN'
                     to:11°N 30.7932'   65°W 59.8134'
LOADCTD: load CTD time series ../A22ctdnav/00401.ctd
Warning: COLON arguments must be real scalars.
> In /home/felixt/A22/scripts/loadctd.m at line 46
  In /home/felixt/ladcp/m/laproc.m at line 60
  In /home/felixt/A22/scripts/runme.m at line 85
 number of CTD scans: 7339  delta t : 0.43198 seconds
 max CTD pressure 996 at 25-Oct-2003 00:27:38
 max LADCP depth 966 at 25-Oct-2003 00:25:06
WARNING WARNING 
 bottom time difference between CTD/LADCP is -3 minute
 Changed Start Time : 24-Oct-2003 23:51:43  to 25-Oct-2003 00:06:58
 Changed End   Time : 25-Oct-2003 01:08:16  to 25-Oct-2003 01:01:48
 CTD max depth : 988
 best lag : 41 pings ~ 53 seconds  corr:0.98323
 adjust ADCP time to CTD time and shift depth record 
 adjust start/end position
GETDPTHI: Depth from vertical velocity inverse method
 starting run 1 to LADCP depth
 take soundspeed from CTD profile 
 correct velocities for sound speed 
 maximum depth from int W is :987.7703
 should be                   :987.7703
  bottom found at 998 +/- 3 m
 removing 191 values below bottom
==> get depth took 104 seconds
PREPINV: prepare data for inversion, form Super-Ensembles
 average profiles over (p.avdz) 16 meter
 discarded 0 bottom tracks velocities because of dist > 300
 reduce weight for larger tilts 0.5 at 10 degree
 will not correct for sound speed twice
 remove reference velocity and average ensembles 
 Outlier discarded 96 bins down looking
 reduced ensemble size is 108
LOADSADCP: load SADCP data file ../sadcp/A22_sadcp.mat
 found 4 SADCP profiles 
==> prep inversion took 11 seconds
GETINV:  compute best velocity profile
 Barotropic velocity error 0.018237 [m/s]
 super ensemble velocity error 0.0082725 [m/s]
 set velocity error to:0.016078 [m/s]
 vertical resolution (ps.dz) is 10 [m]
 preaveraged GPS ships vel 1 times 
 smooth Ocean velocity profile
 found 10 ill constrained elements
 smooth CTD velocity profile
 found 5 ill constrained elements
 bottom inversion 
 mean bottom track weight : 0.83602
 weight for bottom track is (ps.botfac) 1
 mean sadcp weight : 0.60304
 weight for SADCP vel is (ps.sadcpfac) 1
 add barotropic constrain weight: 0.88159
 weight for drag is (ps.dragfac) 0.091459
 ready for inversion  length of d : 1866
           (CTD vel)  length of A1:108
         (ocean vel)  length of A2:99
Moore-Penrose inverse
 solve only down trace
 smooth Ocean velocity profile
 found 12 ill constrained elements
 smooth CTD velocity profile
 found 1 ill constrained elements
Cholesky transform
 solve only up trace
 smooth Ocean velocity profile
 found 9 ill constrained elements
 smooth CTD velocity profile
Cholesky transform
==> inversion took 3 seconds
GETSHEAR2: average shear profile over (ps.dz) 10 [m]
 maximum std (stdf) 2 of data 
 minimum weight  0.1 of data 
 will use 92 % of data 
 increased error because of shear - inverse difference
 compute vertical diffusivity
 use dz:640 m long segments
 save results