FINDLOG: search near file: ../K2001_082/k2017/A2804001.612
 FINDLOG: give up
 FINDLOG: search near file: ../K2001_082/k2017/A2804001.612
 READSERIAL_BB: parse file ../K2001_082/k2017/K2017
 down looking serial number is : 2612
   up looking serial number is : NaN
LOADRDI: Loading data
 loading down-data ../K2001_082/k2017/A2804001.612
ISBB: BB-data 
 raw data has 432+2 bytes per ensemble
 read 10168 ensemble and 16 bins 
 using increased bottom echo amplitudes to create bottom track
 use bin below maximum for bottom track 
 created 387 bottom track data from normal velocities
 removed 0 values because of low percent good
 found 385 finite bottom velocities
 removed 0 values because of high error velocity
 removed 0 bottom values because of high error velocity
 using whole profile since no start time was given
 removed 0 profiles due to larger tilt than 22
 removed 10 profiles due to larger tilt difference than 4
 multiply weight of bin 1 by 0.5
 Outlier discarded 4724 bins down looking
==> load data took 139 seconds
LOADNAV: load NAV time series ../A22ctdnav/01701.ctd
Warning: COLON arguments must be real scalars.
> In /home/felixt/A22/scripts/loadnav.m at line 33
  In /home/felixt/ladcp/m/laproc.m at line 43
  In /home/felixt/A22/scripts/runme.m at line 85
 number of NAV scans: 24042  delta t : 0.86397 seconds
 update start pos  from:NaN°N     NaN'  NaN°E     NaN'
                     to:17°N 21.6744'   65°W 59.8434'
 updated magnetic deviation and applied correction 
 update end pos    from:NaN°N     NaN'  NaN°E     NaN'
                     to:17°N 21.5334'   65°W 59.6658'
LOADCTD: load CTD time series ../A22ctdnav/01701.ctd
Warning: COLON arguments must be real scalars.
> In /home/felixt/A22/scripts/loadctd.m at line 46
  In /home/felixt/ladcp/m/laproc.m at line 60
  In /home/felixt/A22/scripts/runme.m at line 85
 number of CTD scans: 24042  delta t : 0.86397 seconds
 max CTD pressure 4649 at 28-Oct-2003 02:51:36
 max LADCP depth 4540 at 28-Oct-2003 02:51:47
 Changed Start Time : 28-Oct-2003 01:13:03  to 28-Oct-2003 01:31:18
 Changed End   Time : 28-Oct-2003 04:53:20  to 28-Oct-2003 04:45:39
 CTD max depth : 4571
 best lag : 0 pings ~ 0 seconds  corr:0.98652
 adjust ADCP time to CTD time and shift depth record 
 adjust start/end position
GETDPTHI: Depth from vertical velocity inverse method
 starting run 1 to LADCP depth
 take soundspeed from CTD profile 
 correct velocities for sound speed 
 maximum depth from int W is :4571.0436
 should be                   :4571.0436
Warning: Polynomial is badly conditioned. Remove repeated data points
         or try centering and scaling as described in HELP POLYFIT.
> In /usr/local/matlab61/toolbox/matlab/polyfun/polyfit.m at line 74
  In /home/felixt/ladcp/m/getdpthi.m at line 321
  In /home/felixt/ladcp/m/laproc.m at line 75
  In /home/felixt/A22/scripts/runme.m at line 85
  bottom found at 4582 +/- 5 m
 removing 315 values below bottom
==> get depth took 685 seconds
PREPINV: prepare data for inversion, form Super-Ensembles
 average profiles over (p.avdz) 16 meter
 discarded 0 bottom tracks velocities because of dist > 300
 reduce weight for larger tilts 0.5 at 10 degree
 will not correct for sound speed twice
 remove reference velocity and average ensembles 
 Outlier discarded 514 bins down looking
 reduced ensemble size is 505
LOADSADCP: load SADCP data file ../sadcp/A22_sadcp.mat
 found 14 SADCP profiles 
==> prep inversion took 50 seconds
GETINV:  compute best velocity profile
 Barotropic velocity error 0.0051454 [m/s]
 super ensemble velocity error 0.010073 [m/s]
 set velocity error to:0.017255 [m/s]
 vertical resolution (ps.dz) is 10 [m]
 preaveraged GPS ships vel 1 times 
 smooth Ocean velocity profile
 found 9 ill constrained elements
 smooth CTD velocity profile
 found 5 ill constrained elements
 bottom inversion 
 mean bottom track weight : 0.79526
 weight for bottom track is (ps.botfac) 1
 mean sadcp weight : 0.54792
 weight for SADCP vel is (ps.sadcpfac) 1
 add barotropic constrain weight: 3.3535
 weight for drag is (ps.dragfac) 0.1959
 ready for inversion  length of d : 5996
           (CTD vel)  length of A1:505
         (ocean vel)  length of A2:456
Moore-Penrose inverse
 solve only down trace
 smooth Ocean velocity profile
 found 15 ill constrained elements
 smooth CTD velocity profile
 found 2 ill constrained elements
Cholesky transform
 solve only up trace
 smooth Ocean velocity profile
 found 9 ill constrained elements
 smooth CTD velocity profile
 found 1 ill constrained elements
Cholesky transform
==> inversion took 87 seconds
GETSHEAR2: average shear profile over (ps.dz) 10 [m]
 maximum std (stdf) 2 of data 
 minimum weight  0.1 of data 
 will use 91 % of data 
 compute vertical diffusivity
 use dz:640 m long segments
 save results