FINDLOG: search near file: ../K2001_082/k2030/A3006001.612
 FINDLOG: give up
 FINDLOG: search near file: ../K2001_082/k2030/A3006001.612
 READSERIAL_BB: parse file ../K2001_082/k2030/K2030
 down looking serial number is : 2612
   up looking serial number is : NaN
LOADRDI: Loading data
 loading down-data ../K2001_082/k2030/A3006001.612
ISBB: BB-data 
 raw data has 432+2 bytes per ensemble
 read 6048 ensemble and 16 bins 
 using increased bottom echo amplitudes to create bottom track
 use bin below maximum for bottom track 
 created 368 bottom track data from normal velocities
 removed 0 values because of low percent good
 found 364 finite bottom velocities
 removed 0 values because of high error velocity
 removed 0 bottom values because of high error velocity
 using whole profile since no start time was given
 removed 0 profiles due to larger tilt than 22
 removed 18 profiles due to larger tilt difference than 4
 multiply weight of bin 1 by 0.5
 Outlier discarded 2779 bins down looking
==> load data took 42 seconds
LOADNAV: load NAV time series ../A22ctdnav/03001.ctd
 number of NAV scans: 15726  delta t : 0.86397 seconds
NAV timeseries does not overlap WRONG STATION????
  NAV-data : 30-Oct-2003 03:52:53  to 30-Oct-2003 06:03:56
 ADCP-data : 30-Oct-2003 00:36:30  to 30-Oct-2003 02:47:31
 will ignore nav data
LOADCTD: load CTD time series ../A22ctdnav/03001.ctd
 number of CTD scans: 15726  delta t : 0.86397 seconds
 max CTD pressure 3008 at 30-Oct-2003 04:49:38
 max LADCP depth 2481 at 30-Oct-2003 01:28:51
WARNING WARNING 
 bottom time difference between CTD/LADCP is -201 minute
 maybe the hour was set wrong: shift CTD time by :-0.125 days
 Changed Start Time : 30-Oct-2003 00:36:30  to 30-Oct-2003 00:56:57
 Changed End   Time : 30-Oct-2003 02:47:31  to 30-Oct-2003 03:01:58
 CTD max depth : 2970
 best lag : -35 pings ~ -45 seconds  corr:0.42948
 lag to big or correlation to weak ignore CTD time series
 adjust start/end position
GETDPTHI: Depth from vertical velocity inverse method
 starting run 1 to LADCP depth
 take soundspeed from CTD profile 
 correct velocities for sound speed 
 use LADCP depth from constrained integrated W 
no surface reflections up-cast
 maximum depth from int W is :2970.0744
 should be                   :2970.0744
  no bottom found
   given maximum profile depth : 2970
   extracted bottom depth      : 2941
        bottom depth error     : 51
 starting run 2 to LADCP depth
 bottom:1777.6891 @ 1472
 found 34 ill constrained elements
 use LADCP depth from constrained integrated W 
no surface reflections up-cast
 maximum depth from int W is :2970.0343
 should be                   :2970.0744
  bottom found at 2987 +/- 5 m
 removing 555 values below bottom
 last LADCP depth is -362
==> get depth took 297 seconds
PREPINV: prepare data for inversion, form Super-Ensembles
 average profiles over (p.avdz) 16 meter
 discarded 0 bottom tracks velocities because of dist > 300
 reduce weight for larger tilts 0.5 at 10 degree
 will not correct for sound speed twice
 remove reference velocity and average ensembles 
 Outlier discarded 302 bins down looking
 reduced ensemble size is 295
LOADSADCP: load SADCP data file ../sadcp/A22_sadcp.mat
 found 9 SADCP profiles 
==> prep inversion took 21 seconds
GETINV:  compute best velocity profile
 Barotropic velocity error 0.0079989 [m/s]
 super ensemble velocity error 0.010148 [m/s]
 vertical resolution (ps.dz) is 10 [m]
 preaveraged GPS ships vel 1 times 
 smooth Ocean velocity profile
 found 7 ill constrained elements
 smooth CTD velocity profile
 found 2 ill constrained elements
 bottom inversion 
 mean bottom track weight : 0.82339
 weight for bottom track is (ps.botfac) 1
 mean sadcp weight : 0.71696
 weight for SADCP vel is (ps.sadcpfac) 1
 add barotropic constrain weight: 1
 weight for drag is (ps.dragfac) 0.18048
 ready for inversion  length of d : 3810
           (CTD vel)  length of A1:295
         (ocean vel)  length of A2:297
Moore-Penrose inverse
 solve only down trace
 smooth Ocean velocity profile
 found 9 ill constrained elements
 smooth CTD velocity profile
Cholesky transform
 solve only up trace
 smooth Ocean velocity profile
 found 49 ill constrained elements
 smooth CTD velocity profile
 found 2 ill constrained elements
Cholesky transform
 found 32 big >5 m/s up cast UOCEAN:
==> inversion took 18 seconds
GETSHEAR2: average shear profile over (ps.dz) 10 [m]
 maximum std (stdf) 2 of data 
 minimum weight  0.1 of data 
 will use 93 % of data 
 compute vertical diffusivity
 use dz:640 m long segments
PROBLEM WITH PROFILE 030: Error using ==> set
Bad value for axes property: 'XLim'
Values must be increasing and non-NaN.


fid =

    31


ans =

   121

Profile 031
 GETFILE: search near file: ../K2001_082/k2031*
 GETFILE: found directory/ies 
LDEO LADCP software: Version 7i: 23 Jan 2004