FINDLOG: search near file: ../K2001_082/k2034/A3103001.612 FINDLOG: give up FINDLOG: search near file: ../K2001_082/k2034/A3103001.612 READSERIAL_BB: parse file ../K2001_082/k2034/K2034 down looking serial number is : 2612 up looking serial number is : NaN LOADRDI: Loading data loading down-data ../K2001_082/k2034/A3103001.612 ISBB: BB-data raw data has 432+2 bytes per ensemble read 12854 ensemble and 16 bins using increased bottom echo amplitudes to create bottom track use bin below maximum for bottom track created 18 bottom track data from normal velocities removed 0 values because of low percent good found 9 finite bottom velocities removed 0 values because of high error velocity removed 0 bottom values because of high error velocity using whole profile since no start time was given removed 0 profiles due to larger tilt than 22 removed 31 profiles due to larger tilt difference than 4 multiply weight of bin 1 by 0.5 Outlier discarded 6137 bins down looking ==> load data took 137 seconds LOADNAV: load NAV time series ../A22ctdnav/03401.ctd number of NAV scans: 31731 delta t : 0.43198 seconds update start pos from:NaN°N NaN' NaN°E NaN' to:19°N 41.2086' 65°W 59.9736' updated magnetic deviation and applied correction update end pos from:NaN°N NaN' NaN°E NaN' to:19°N 40.2108' 66°W 0.9384' LOADCTD: load CTD time series ../A22ctdnav/03401.ctd number of CTD scans: 31731 delta t : 0.43198 seconds max CTD pressure 6003 at 31-Oct-2003 00:50:04 max LADCP depth 5829 at 31-Oct-2003 00:50:02 Changed Start Time : 30-Oct-2003 22:52:12 to 30-Oct-2003 23:08:15 Changed End Time : 31-Oct-2003 03:30:40 to 31-Oct-2003 03:22:23 CTD max depth : 5885 best lag : 1 pings ~ 1 seconds corr:0.98257 adjust ADCP time to CTD time and shift depth record adjust start/end position GETDPTHI: Depth from vertical velocity inverse method starting run 1 to LADCP depth take soundspeed from CTD profile correct velocities for sound speed maximum depth from int W is :5884.8304 should be :5884.8304 bottom found at +/- NaN m ==> get depth took 1150 seconds PREPINV: prepare data for inversion, form Super-Ensembles average profiles over (p.avdz) 16 meter reduce weight for larger tilts 0.5 at 10 degree will not correct for sound speed twice remove reference velocity and average ensembles Outlier discarded 678 bins down looking reduced ensemble size is 655