FINDLOG: search near file: ../K2001_082/k2054/B0611001.612
 FINDLOG: give up
 FINDLOG: search near file: ../K2001_082/k2054/B0611001.612
 READSERIAL_BB: parse file ../K2001_082/k2054/K2054
 down looking serial number is : 2612
   up looking serial number is : NaN
LOADRDI: Loading data
 loading down-data ../K2001_082/k2054/B0611001.612
ISBB: BB-data 
 raw data has 432+2 bytes per ensemble
 read 9567 ensemble and 16 bins 
 using increased bottom echo amplitudes to create bottom track
 use bin below maximum for bottom track 
 created 332 bottom track data from normal velocities
 removed 0 values because of low percent good
 found 331 finite bottom velocities
 removed 0 values because of high error velocity
 removed 0 bottom values because of high error velocity
 using whole profile since no start time was given
 removed 0 profiles due to larger tilt than 22
 removed 19 profiles due to larger tilt difference than 4
 multiply weight of bin 1 by 0.5
 Outlier discarded 4301 bins down looking
==> load data took 80 seconds
LOADNAV: load NAV time series ../A22ctdnav/05401.ctd
 number of NAV scans: 2416  delta t : 0.86397 seconds
NAV timeseries does not overlap WRONG STATION????
  NAV-data : 06-Nov-2003 07:35:12  to 06-Nov-2003 07:55:20
 ADCP-data : 06-Nov-2003 08:19:48  to 06-Nov-2003 11:47:04
 will ignore nav data
LOADCTD: load CTD time series ../A22ctdnav/05401.ctd
 number of CTD scans: 2416  delta t : 0.86397 seconds
 max CTD pressure 253 at 06-Nov-2003 07:45:09
 max LADCP depth 4489 at 06-Nov-2003 09:45:28
WARNING WARNING 
 bottom time difference between CTD/LADCP is 120 minute
 maybe the hour was set wrong: shift CTD time by :0.083333 days
 Changed Start Time : 06-Nov-2003 08:19:48  to 06-Nov-2003 09:38:11
 Changed End   Time : 06-Nov-2003 11:47:04  to 06-Nov-2003 09:52:15
 CTD max depth : 251
 best lag : 24 pings ~ 31 seconds  corr:0.21602
 lag to big or correlation to weak ignore CTD time series
 adjust start/end position
GETDPTHI: Depth from vertical velocity inverse method
 starting run 1 to LADCP depth
 take soundspeed from CTD profile 
 correct velocities for sound speed 
 use LADCP depth from constrained integrated W 
 maximum depth from int W is :251.1305
 should be                   :251.1305
 starting run 2 to LADCP depth
 bottom:343.8622 @ 336
 found 43 ill constrained elements
 use LADCP depth from constrained integrated W 
 maximum depth from int W is :285.3966
 should be                   :251.1305
  bottom found at 313 +/- 4 m
 removing 589 values below bottom
 remove data at begining and end of cast
 adjust start and end time 
 find new start end position
==> get depth took 30 seconds
PREPINV: prepare data for inversion, form Super-Ensembles
 average profiles over (p.avdz) 16 meter
 discarded 0 bottom tracks velocities because of dist > 300
 reduce weight for larger tilts 0.5 at 10 degree
 will not correct for sound speed twice
 remove reference velocity and average ensembles 
 Outlier discarded 37 bins down looking
 reduced ensemble size is 29
LOADSADCP: load SADCP data file ../sadcp/A22_sadcp.mat
 found 1 SADCP profiles 
==> prep inversion took 3 seconds
GETINV:  compute best velocity profile
 Barotropic velocity error 0.07472 [m/s]
 super ensemble velocity error 0.012365 [m/s]
 vertical resolution (ps.dz) is 10 [m]
 preaveraged GPS ships vel 1 times 
 smooth Ocean velocity profile
 found 5 ill constrained elements
 smooth CTD velocity profile
 bottom inversion 
 mean bottom track weight : 0.77615
 weight for bottom track is (ps.botfac) 1
 mean sadcp weight : 1
 weight for SADCP vel is (ps.sadcpfac) 1
 add barotropic constrain weight: 1
 weight for drag is (ps.dragfac) 0.028348
 ready for inversion  length of d : 429
           (CTD vel)  length of A1:29
         (ocean vel)  length of A2:30
Moore-Penrose inverse
 solve only down trace
 smooth Ocean velocity profile
 found 6 ill constrained elements
 smooth CTD velocity profile
Cholesky transform
 solve only up trace
 smooth Ocean velocity profile
 found 5 ill constrained elements
 smooth CTD velocity profile
Cholesky transform
==> inversion took 1 seconds
GETSHEAR2: average shear profile over (ps.dz) 10 [m]
 maximum std (stdf) 2 of data 
 minimum weight  0.1 of data 
 will use 72 % of data 
 compute vertical diffusivity
 use dz:640 m long segments
PROBLEM WITH PROFILE 054: Error using ==> set
Bad value for axes property: 'XLim'
Values must be increasing and non-NaN.


fid =

    31


ans =

   121

Profile 055
 GETFILE: search near file: ../K2001_082/k2055*
 GETFILE: found directory/ies 
LDEO LADCP software: Version 7i: 23 Jan 2004